Chipset Heatsink

The surface-mount heat sinks is suitable for SMT power semiconductor devices in TO 252, TO 263 packages, etc. Their unique design removes heat indirectly through conduction without making contact with the SMT device like traditional through-hole solutions.

A heat sink is a heat exchanger that enables the transfer of heat generated by a device to surrounding media of lower temperature. By dissipating heat away from the device, its main function is to balance said device’s temperature at optimum levels for it to function as desired. The satmping heatsinks provide for tight integration of the heat sinks, minimize product cost, and enable fast ramp-up to high-volume production.

As the power density requirements and heat generated by electronic devices in electronic power equipment increase, the problem of how to cool these electronic devices has become a huge challenge. The heat sink is a cost-effective heat exchanger. The optimized design of the heat sink can directly determine the reliability, service life and overall performance of the device.

For power devices like power MOSFET, power BJT and power diode, heat sink is very important to provide heat dissipation. From the name itself, it will absorb the heat of the power device and help control the temperature of the safe zone inside the device.

For power devices like power MOSFET, power BJT and power diode, heat sink is very important to provide heat dissipation. From the name itself, it will absorb the heat of the power device and help control the temperature of the safe zone inside the device.

In various types of switching power supplies, MOS transistors, as key power switching devices, generate a lot of heat when working. MOS heat sinks can ensure that MOS tubes work within a stable temperature range and improve the efficiency and reliability of power supplies.

When SSR working, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink, also if the current is over 60A, the cooling fan also required. And don't forget apply heat-conductive silicon grease between SSR and heat sink.

When SSR working, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink, also if the current is over 60A, the cooling fan also required. And don't forget apply heat-conductive silicon grease between SSR and heat sink.

When SSR working, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink, also if the current is over 60A, the cooling fan also required. And don't forget apply heat-conductive silicon grease between SSR and heat sink.

When SSR working, it will give out a lot of heat, so in order to extend the life of your SSR, please install a heat sink, also if the current is over 60A, the cooling fan also required. And don't forget apply heat-conductive silicon grease between SSR and heat sink.

TO-220 Heatsink for optimal natural convection cooling per unit volume occupied above the PCB for your TO-220 devices. Heatsink and mounting kit for TO-220 devices such as regulators, transistors and rectifiers. 

Aluminum heatsink can effectively transfer the heat generated by TO-220 components to the surface of the heat sink and then dissipate it into the surrounding environment. Compared with some other metal materials, aluminum is relatively low in cost and light in weight, making it suitable for widespread use in electronic devices.